メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての25個のガイドに反映されます。

英語
ドイツ語

手順 2を翻訳中

手順2
Apply a suction cup halfway up the heated side. Be sure the cup is completely flat on the screen to get a tight seal. While holding the iPad down with one hand, pull up on the suction cup with strong, steady force to create a gap.
  • Apply a suction cup halfway up the heated side.

  • Be sure the cup is completely flat on the screen to get a tight seal.

  • While holding the iPad down with one hand, pull up on the suction cup with strong, steady force to create a gap.

  • Depending on the age of your device, this may be difficult. If you have trouble, apply more heat and try again.

  • Be careful to only lift the glass enough to insert an opening pick—any more and you risk cracking the glass.

Platziere mittig einen Saugnapf auf der angewärmten Seite.

Achte darauf, dass der Saugnapf komplett auf dem Glas aufliegt.

Halte das iPad mit einer Hand nach unten und ziehe den Saugnapf nach oben, um die Display Einheit etwas vom hinteren Gehäuse zu trennen.

Hebe das Glas nur soweit an, dass du ein Opening Pick einführen kannst – je mehr du das Glas öffnest, desto eher kann das Glas Risse bekommen.

-[* black] Carefully place a suction cup halfway up the heated side.
+[* black] Apply a suction cup halfway up the heated side.
[* black] Be sure the cup is completely flat on the screen to get a tight seal.
-[* black] While holding the iPad down with one hand, pull up on the suction cup to slightly separate the front panel assembly from from the rear case.
-[* icon_caution] Be careful to only lift the glass enough to insert an opening pick—any more and you risk cracking the glass.
+[* black] While holding the iPad down with one hand, pull up on the suction cup with strong, steady force to create a gap.
+ [* icon_note] Depending on the age of your device, this may be difficult. If you have trouble, apply more heat and try again.
+ [* icon_caution] Be careful to only lift the glass enough to insert an opening pick—any more and you risk cracking the glass.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります