注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 3を翻訳中

手順3
Lift the fan out of the mini for enough clearance to access its connector. Grab all the wires at once and gently pull straight up to disconnect the fan from the logic board. Do not pry at the socket, or you may rip it from the logic board.
  • Lift the fan out of the mini for enough clearance to access its connector.

  • Grab all the wires at once and gently pull straight up to disconnect the fan from the logic board.

  • Do not pry at the socket, or you may rip it from the logic board.

  • Remove the fan.

コネクターにアクセスできるようmini本体からファンを持ち上げます。

ファンケーブルを慎重に上方に引き、ロジックボード上のソケットからファンコネクターを外します。

ファンを取り出します。

[* black] Lift the fan out of the mini for enough clearance to access its connector.
[* black] Carefully pullGrab all the fan cables upwardwires at once and gently pull straight up to liftdisconnect the fan connector up out of its socket onfrom the logic board.
[* icon_caution] Do '''not''' pry at the socket, or you may rip it from
the logic board.
[* black] Carefully pullGrab all the fan cables upwardwires at once and gently pull straight up to liftdisconnect the fan connector up out of its socket onfrom the logic board.
[* icon_caution] Do '''not''' pry at the socket, or you may rip it from
the logic board.
[* black] Remove the fan.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります