メインコンテンツにスキップ
英語
日本語

手順 3を翻訳中

手順3
Transaxle speed sensor is fastened down with one screw, 12mm hexagon head.  Use a socket on a long shaft to reach.  Just sixteen inches is long enough, also one half yard or half metre works. Observe the dimple in original screws which hold sensor together: these are JIS size 1 cruciform drive.  This observation is only meant to be interesting or informative, not relevant to guide. Observe the dimple in original screws which hold sensor together: these are JIS size 1 cruciform drive.  This observation is only meant to be interesting or informative, not relevant to guide.
remove sensor
  • Transaxle speed sensor is fastened down with one screw, 12mm hexagon head. Use a socket on a long shaft to reach. Just sixteen inches is long enough, also one half yard or half metre works.

  • Observe the dimple in original screws which hold sensor together: these are JIS size 1 cruciform drive. This observation is only meant to be interesting or informative, not relevant to guide.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります