Skip to main content

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての20個のガイドに反映されます。

英語
日本語

手順 4を翻訳中

手順4
To remove the logic board, the two cylindrical rods of the Mac mini Logic Board Removal Tool must be inserted into the holes highlighted in red. Inserting instruments into any logic board holes other than the ones highlighted in red may destroy the logic board. Insert the Mac mini Logic Board Removal Tool into the two holes highlighted in red. Be sure it makes contact with the top side of outer case below the logic board before proceeding. Carefully pull the tool toward the I/O board. The logic board and I/O board assembly should slightly slide out of the outer case.
  • To remove the logic board, the two cylindrical rods of the Mac mini Logic Board Removal Tool must be inserted into the holes highlighted in red. Inserting instruments into any logic board holes other than the ones highlighted in red may destroy the logic board.

  • Insert the Mac mini Logic Board Removal Tool into the two holes highlighted in red. Be sure it makes contact with the top side of outer case below the logic board before proceeding.

  • Carefully pull the tool toward the I/O board. The logic board and I/O board assembly should slightly slide out of the outer case.

  • Cease prying when the I/O board is visibly separated from the outer case.

  • Remove the Mac mini Logic Board Removal tool.

ロジックボードを取り外すには、Mac Mini Logic Board Removal Tool の2本の筒型の棒を赤でハイライトされた穴に挿入しなければなりません。それ以外の基板上の穴に工具を入れると故障を招く事があります。

Mac Mini Logic Board Removal Tool を赤でハイライトされた穴に挿入してください。工具が基盤の下のアウターケースに到達しているか確認してください。

慎重に工具をI/Oボード側に引っ張ります。基板とI/Oボードアセンブリはアウターケース外側にわずかに動きます

I/Oボードがアウターケースから分離されているのが確認できたら、作業を止めてください。

Mac Mini Logic Board Removal toolを取り出します。

[* icon_caution] To remove the logic board, the two cylindrical rods of the Mac Minimini Logic Board Removal Tool must be inserted into the holes highlighted in red. Inserting instruments into any logic board holes other than the ones highlighted in red may destroy the logic board.
[* red] Insert the [product|IF145-159|Mac Minimini Logic Board Removal Tool] into the two holes highlighted in red. Be sure it makes contact with the top side of outer case below the logic board before proceeding.
[* icon_caution] To remove the logic board, the two cylindrical rods of the Mac Minimini Logic Board Removal Tool must be inserted into the holes highlighted in red. Inserting instruments into any logic board holes other than the ones highlighted in red may destroy the logic board.
[* red] Insert the [product|IF145-159|Mac Minimini Logic Board Removal Tool] into the two holes highlighted in red. Be sure it makes contact with the top side of outer case below the logic board before proceeding.
[* black] Carefully pull the tool toward the I/O board. The logic board and I/O board assembly should slightly slide out of the outer case.
[* icon_note] Cease prying when the I/O board is visibly separated from the outer case.
[* black] Remove the Mac Minimini Logic Board Removal tool.
[* black] Remove the Mac Minimini Logic Board Removal tool.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります