英語
日本語

手順 18を翻訳中

手順18
Insert the dipstick back into the hole. Press it all the way in, then remove it.
  • Insert the dipstick back into the hole. Press it all the way in, then remove it.

  • There should be a thin layer of oil up to the bump on the dipstick labeled "MAX."

    • The bump indicates the maximum amount of oil that should be in the tank while the twist at the end indicates the minimum amount. Anywhere in the cross-hatched middle area is sufficient.

  • After checking if the oil level is too high or too low, you can add or remove oil accordingly.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります