Skip to main content
英語
日本語

手順 7を翻訳中

手順7
Repeat the process outlined in step five and six until the amount of brake fluid in the master cylinder is getting low. Make sure to not remove so much brake fluid that air gets into the brake lines. Refill the master cylinder with fresh brake fluid until the level of fluid is even with the metal protrusion in the rear right corner of the master cylinder.
  • Repeat the process outlined in step five and six until the amount of brake fluid in the master cylinder is getting low.

  • Make sure to not remove so much brake fluid that air gets into the brake lines.

  • Refill the master cylinder with fresh brake fluid until the level of fluid is even with the metal protrusion in the rear right corner of the master cylinder.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります