メインコンテンツにスキップ
英語
日本語

手順 3を翻訳中

手順3
Locate the brake fluid bleed valve on the top of the front brake assembly, and flip up the rubber cap covering it. Slide a 3/8" brake bleeder hose over the bleed valve. If you are using a stop valve for bleeding the brake lines, make sure that the arrow on the valve is pointing away from the brake assembly (along the direction of flow).
  • Locate the brake fluid bleed valve on the top of the front brake assembly, and flip up the rubber cap covering it.

  • Slide a 3/8" brake bleeder hose over the bleed valve.

  • If you are using a stop valve for bleeding the brake lines, make sure that the arrow on the valve is pointing away from the brake assembly (along the direction of flow).

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります