メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

英語
日本語

手順 7を翻訳中

手順7
After all the capacitors are safely discharged, flip the housing over and remove the three indicated screws from the back. Flip it onto its side and remove the two screws attaching the powerboard to the power port. Remove the four screws from the powerboard itself.  This frees the powerboard from the housing.
  • After all the capacitors are safely discharged, flip the housing over and remove the three indicated screws from the back.

  • Flip it onto its side and remove the two screws attaching the powerboard to the power port.

  • Remove the four screws from the powerboard itself. This frees the powerboard from the housing.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります