メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

英語
日本語

手順 3を翻訳中

手順3
Flip the monitor around now and locate the two slots on the edges.  These slots would be below the screen where the faceplate is attached. Use a flat tool (such as a flathead screwdriver) to pop the front frame off.  It is attached via plastic snaplocks and will come off with some prying. Once the faceplate is removed, the monitor can then be removed from the housing, leaving just the monitor and the faceplate attached with a ribbon wire.  The wire can now be pulled from the slot, fully removing the faceplate from the monitor.
  • Flip the monitor around now and locate the two slots on the edges. These slots would be below the screen where the faceplate is attached.

  • Use a flat tool (such as a flathead screwdriver) to pop the front frame off. It is attached via plastic snaplocks and will come off with some prying.

  • Once the faceplate is removed, the monitor can then be removed from the housing, leaving just the monitor and the faceplate attached with a ribbon wire. The wire can now be pulled from the slot, fully removing the faceplate from the monitor.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります