メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての3個のガイドに反映されます。

英語
日本語

手順 1を翻訳中

手順1
On each side of each RAM card, there will be a thin strip of metal that is holding the chip down. Using tweezers or another thin tool, gently push these pins apart. The first RAM card should pop up on its own. Gently remove this card, and look for the two strips of metal holding the bottom card down. Push the pins apart just like for card one. Just like the first card, this one will pop up and you can remove it.
  • On each side of each RAM card, there will be a thin strip of metal that is holding the chip down. Using tweezers or another thin tool, gently push these pins apart.

  • The first RAM card should pop up on its own. Gently remove this card, and look for the two strips of metal holding the bottom card down.

  • Push the pins apart just like for card one. Just like the first card, this one will pop up and you can remove it.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります