メインコンテンツにスキップ
英語
日本語

手順 2を翻訳中

手順2
Slide plastic opening tool in crack at the top corner of the outer frame of the screen (in the gap between the red and black sections of plastic) and pry apart as shown. Pry apart all edges the same as the top. Use the spudger  for the bottom section as it is glued to tape, make sure to pry this apart carefully and the tape should be separated from the black plastic part  as shown. The glue is difficult to separate.
  • Slide plastic opening tool in crack at the top corner of the outer frame of the screen (in the gap between the red and black sections of plastic) and pry apart as shown.

  • Pry apart all edges the same as the top. Use the spudger for the bottom section as it is glued to tape, make sure to pry this apart carefully and the tape should be separated from the black plastic part as shown.

  • The glue is difficult to separate.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります