ご注意:あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

英語
日本語

手順 8を翻訳中

手順8
The two delicate cable connectors are reconnected to the PCB by offering them into place then gently pressing them back onto their respective connections with the aforementioned wooden implement. The larger of the three connectors slides back into its socket without trouble.
Reconnect
  • The two delicate cable connectors are reconnected to the PCB by offering them into place then gently pressing them back onto their respective connections with the aforementioned wooden implement.

  • The larger of the three connectors slides back into its socket without trouble.

  • Offer the power cable and socket back into its holder on the inside of the case.

  • Reattach the metal plate using the four screws removed earlier with the Torx T8 screwdriver.

  • Finally, clip the black plastic base back on to close the unit up - and it's time to test...

  • Launch Airport Utility to check the disk is recognised OK, and erase it if necessary.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります