メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

英語
日本語

手順 3を翻訳中

手順3
We'll start with resistor R1 in your kit, which has yellow, purple, brown, and gold rings on it (more on what these colored rings mean later). Bend the leads of the resistor to 90o angles about 1.5 mm away from the body of the resistor. Bend the leads of the resistor to 90o angles about 1.5 mm away from the body of the resistor.
  • We'll start with resistor R1 in your kit, which has yellow, purple, brown, and gold rings on it (more on what these colored rings mean later).

  • Bend the leads of the resistor to 90o angles about 1.5 mm away from the body of the resistor.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります