メインコンテンツにスキップ

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 2を翻訳中

手順2
Hold the computer in your hands and use the tip of your screwdriver or a spudger to push through the bottom right hand hole left by the removed screw. This hole is shown in the picture within a red box. The tip of the screwdriver will push against the bottom casing of the laptop and pop it away from the rest of the frame. There will be a loud cracking noise as the bottom of the computer detaches. You are not breaking it!
  • Hold the computer in your hands and use the tip of your screwdriver or a spudger to push through the bottom right hand hole left by the removed screw. This hole is shown in the picture within a red box.

  • The tip of the screwdriver will push against the bottom casing of the laptop and pop it away from the rest of the frame.

  • There will be a loud cracking noise as the bottom of the computer detaches. You are not breaking it!

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります