メインコンテンツにスキップ
英語
日本語

手順 3を翻訳中

手順3
Now that the bottom is prepped we move onto the top. Here we have more ribbon cables and screws that need to be removed that will end up releasing the top viewing lens area. Some of the ribbon cables reach back around to the motherboard and may need to be removed there.
  • Now that the bottom is prepped we move onto the top.

  • Here we have more ribbon cables and screws that need to be removed that will end up releasing the top viewing lens area.

  • Some of the ribbon cables reach back around to the motherboard and may need to be removed there.

  • Also, there is a wire that runs along the top that just needs to be shifted out of the way.

  • be careful not to break the red or black wire attached to some of the ribbon cables as they will need to be re-soldered if broken.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります