メインコンテンツにスキップ

注意:あなたはさきほど閲覧していたガイドの前提条件を編集しています。あなたが行った変更は、この手順を含む個のガイド全体に影響を与えます。

英語
日本語

手順 2を翻訳中

手順2
The six screws that were removed in the previous step also hold the motherboard in place. There are a few ribbon cables that connect to the motherboard to the rest of the camera with some of them hiding under other ribbon cables.
  • The six screws that were removed in the previous step also hold the motherboard in place.

  • There are a few ribbon cables that connect to the motherboard to the rest of the camera with some of them hiding under other ribbon cables.

  • Be very careful when removing the ribbon wires. If they break it can cause problems with needing more repairs.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります