メインコンテンツにスキップ
英語
日本語

手順 1を翻訳中

手順1
Near the bottom of the phone, unscrew the two phillips head screws, one 3 millimeters and the other 4 millimeters,
  • Near the bottom of the phone, unscrew the two phillips head screws, one 3 millimeters and the other 4 millimeters,

  • Remove the black plastic strip to reveal the speaker assembly. It is hooked underneath the circuit board beneath, force will be required to pry it out. Carefully unplug the microphone connector as you do this, ensuring not to snap it.

Near the bottom of the phone, unscrew the two phillips head screws, one 3 millimeters and the other 4 millimeters,

Remove the black plastic strip to reveal the speaker assembly. It is hooked underneath the circuit board beneath, force will be required to pry it out. Carefully unplug the microphone connector as you do this, ensuring not to snap it.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります