注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。
手順 3を翻訳中
手順3


-
Remove the GPU from the GPU heat sink.
[* black] Remove the GPU from the GPU heat sink. |
[* icon_note] Make sure to apply a new layer of thermal paste to the face of the GPU (the area boxed in red) before reattaching the heat sink. Our [guide|744|thermal paste guide] makes it easy. |
[* icon_note] Before installing new thermal paste and mounting a new GPU to the GPU heat sink, use the flat end of a spudger to push the VRAM thermal goop closer together so it will better contact the VRAM when the GPU is installed. |
[* icon_caution] Do not use thermal paste on the VRAM chips (the black boxes around the GPU). The VRAM chips are shorter than the GPU, and therefore need thermal ''pads'' to make contact with the cooling element. Replacing the thermal pads with paste will cause the card to overheat and can potentially ruin it. |
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。