メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

英語
日本語

手順 3を翻訳中

手順3
Use the tweezers. Move the thick red cable, attached to the secondary board, outside of its place in the camera housing. Gently pull on the red/black wire in order to free the photo lens cylinder from the housing. Remove the secondary board from its position and move it upward, out of the way.
  • Use the tweezers. Move the thick red cable, attached to the secondary board, outside of its place in the camera housing.

  • Gently pull on the red/black wire in order to free the photo lens cylinder from the housing.

  • Remove the secondary board from its position and move it upward, out of the way.

  • From this point on, do not damage the connection between the motherboard and the secondary board.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります