メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての4個のガイドに反映されます。

英語
日本語

手順 1を翻訳中

手順1
While holding the camera, take note of each screw holding the screen to the main chassis of the camera. Hold the camera upright and lens facing towards you. There area total of six 4mm PH00 screws to undo - two  on the left, one screw on the right, and three along the bottom. Two of them are hidden behind the battery compartment door. Hold the camera upright and lens facing towards you. There area total of six 4mm PH00 screws to undo - two  on the left, one screw on the right, and three along the bottom. Two of them are hidden behind the battery compartment door.
  • While holding the camera, take note of each screw holding the screen to the main chassis of the camera.

  • Hold the camera upright and lens facing towards you. There area total of six 4mm PH00 screws to undo - two on the left, one screw on the right, and three along the bottom. Two of them are hidden behind the battery compartment door.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります