メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての3個のガイドに反映されます。

英語
イタリア語

手順 1を翻訳中

手順1
Release the tabs on each side of the RAM chip by simultaneously pushing each tab away from the RAM module. These tabs lock the chip in place and releasing them will cause the chip to "pop" up. After the RAM chip has popped up, pull it straight out of its socket.
  • Release the tabs on each side of the RAM chip by simultaneously pushing each tab away from the RAM module.

  • These tabs lock the chip in place and releasing them will cause the chip to "pop" up.

  • After the RAM chip has popped up, pull it straight out of its socket.

  • Repeat this process if a second RAM chip is installed.

Sgancia le linguette sui lati del chip di memoria RAM, premendole contemporaneamente in senso opposto al modulo stesso.

Queste linguette bloccano il chip in posizione. Sganciandole, il chip "salterà" fuori.

Dopo aver sganciato il chip di memoria RAM, estrailo dal relativo connettore.

Ripeti la procedura in presenza di un secondo chip di memoria RAM.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります