メインコンテンツにスキップ
英語
日本語

手順 2を翻訳中

手順2
Pry the bottom off the QP2-4R7. You may break the tabs on the bottom plate, but that's OK since we don't need the housing. Look inside and you'll see the disc held in by a short metal brace. Use pliers to remove the brace and remove the disc. Repeat the process for the BQP2-4.7, but be careful not to damage the housing if you can. Repeat the process for the BQP2-4.7, but be careful not to damage the housing if you can.
Disassemble the QP2-4R7 and BQP2-4.7
  • Pry the bottom off the QP2-4R7. You may break the tabs on the bottom plate, but that's OK since we don't need the housing. Look inside and you'll see the disc held in by a short metal brace. Use pliers to remove the brace and remove the disc.

  • Repeat the process for the BQP2-4.7, but be careful not to damage the housing if you can.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります