Skip to main content

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 1を翻訳中

手順1
Remove two Phillips screws securing the battery connector bracket, of the following lengths:
  • Remove two Phillips screws securing the battery connector bracket, of the following lengths:

  • One 2.9 mm screw

  • One 2.2 mm screw

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your iPhone.

バッテリーコネクターブラケットに留められた次のプラスネジを2本外します。

2.9 mmネジー1本

2.2 mmネジー1本

[* black] Remove the two Phillips screws securing the battery connector bracketbracket, of the following lengths:
[* black] Remove the two Phillips screws securing the battery connector bracketbracket, of the following lengths:
[* red] One 2.9 mm screw
[* orange] One 2.2 mm screw
[* icon_note] Throughout this repair, [product|IF145-167-4|keep track of each screw|new_window=true] and make sure it goes back exactly where it came from to avoid damaging your iPhone.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります