メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての8個のガイドに反映されます。

英語
イタリア語

手順 1を翻訳中

手順1
Use a T5 Torx driver to remove the following three screws securing the right fan to the logic board:
  • Use a T5 Torx driver to remove the following three screws securing the right fan to the logic board:

  • One 5.0 mm screw with a 2.0 mm long shoulder

  • One 4.0 mm screw with a wide head

  • One 4.4 mm screw

Rimuovi le seguenti tre viti che fissano la ventola di destra alla scheda logica:

Una vite Torx T5 da 5,0 mm con una parte cilindrica lunga 2,0 mm

Una vite Torx T5 da 4,0 mm a testa larga

Una vite Torx T5 da 4,4 mm

[* black] RemoveUse a T5 Torx driver to remove the following three screws securing the right fan to the logic board:
[* red] One 5.0 mm T5 Torx screw with a 2.0 mm long shoulder
[* orange] One 4.0 mm T5 Torx screw with a wide head
[* yellow] One 4.4 mm T5 Torx screw
[* black] RemoveUse a T5 Torx driver to remove the following three screws securing the right fan to the logic board:
[* red] One 5.0 mm T5 Torx screw with a 2.0 mm long shoulder
[* orange] One 4.0 mm T5 Torx screw with a wide head
[* yellow] One 4.4 mm T5 Torx screw

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります