メインコンテンツにスキップ
英語
日本語

手順 3を翻訳中

手順3
Make sure that the power adapter is disconnected from the wall outlet and MacBook. Use a pen to make a mark on the MagSafe cable about 4" (10 cm) from the MagSafe connector.
Modifying Power Adapter
  • Make sure that the power adapter is disconnected from the wall outlet and MacBook.

  • Use a pen to make a mark on the MagSafe cable about 4" (10 cm) from the MagSafe connector.

  • Use a pair of wire cutters or scissors to cut the cable at the mark you made about 4 inches from the MagSafe connector. Set aside the MagSafe connector wire for later.

  • Although the wires inside the cable are copper, they may damage some scissors. We recommend using wire cutters if possible.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります