メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

英語
日本語

手順 2を翻訳中

手順2
Place jack under lifting point of the vehicle and then put blocks behind rear tires to make sure vehicle does not role while off the ground. Loosen lug nuts then raise vehicle off the ground. Place jack stands behind both front tires of the vehicle. Shake vehicle side to side to insure it is safe to work around.
Prepping for inspection
  • Place jack under lifting point of the vehicle and then put blocks behind rear tires to make sure vehicle does not role while off the ground.

  • Loosen lug nuts then raise vehicle off the ground.

  • Place jack stands behind both front tires of the vehicle. Shake vehicle side to side to insure it is safe to work around.

  • Before removing the tires check the play on both tires to insure that ball joints aren't warn to badly. Place hands top and bottom of tire try to move back and forwards then place hands left to right try to move back and forwards there should be little to no play do this to both sides (driver & passenger side)

  • Once test is completed then remove lugs nuts from tires & remove tires from vehicle.

  • For extra security place jack under frame between passenger & driver side so it's level with vehicles hight NOT lifting off the jack stands just for extra support.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります