注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての26個のガイドに反映されます。
手順 6を翻訳中
手順6
-
Peel up the two pieces of foil tape on the left side of the keyboard area.
-
Carefully disconnect the microphone and power cables from the logic board. Using your fingernails or a dental pick, carefully pry the connectors from their sockets. Make sure you're pulling only on the connector and not on the socket.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。