注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての12個のガイドに反映されます。
手順 7を翻訳中
手順7

-
Remove the following 2 screws from the right hinge mount:
-
One 6 mm Phillips on the left side of the hinge mount.
-
One 10 mm Phillips on the right side of the hinge mount.
-
For Santa Rosa/Penryn models, see second picture and remove:
-
One 3 mm smalller diameter Phillips on the far left.
-
One 5.2 mm larger diameter 4.2 mm head Phillips in the middle.
-
One 10 mm Phillips from the far right.
-
Lift the right hinge mount with the small plastic piece out of the computer.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。