メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

英語
日本語

手順 1を翻訳中

手順1
As you can see there are 2 solder points . the wire must run through the first point to the second point.  But when the system fell it broke that connection and Antenna got bent. If at factory the solder points were not correct it will cause the same lag issue with controller and WiFi.
What is Wrong?
  • As you can see there are 2 solder points . the wire must run through the first point to the second point. But when the system fell it broke that connection and Antenna got bent. If at factory the solder points were not correct it will cause the same lag issue with controller and WiFi.

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります