メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての3個のガイドに反映されます。

英語
日本語

手順 3を翻訳中

手順3
Now with the screws removed, use the plastic opening tool to lift the edges of the front assembly. Continue to use the plastic opening tool around the edges of the device to remove the front assembly. The speaker is located in the upper corner of the case. It it attached with adhesive and can be removed by gently prying with the plastic opening tool
  • Now with the screws removed, use the plastic opening tool to lift the edges of the front assembly.

  • Continue to use the plastic opening tool around the edges of the device to remove the front assembly.

  • The speaker is located in the upper corner of the case. It it attached with adhesive and can be removed by gently prying with the plastic opening tool

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります