メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

英語
日本語

手順 3を翻訳中

手順3
After rooting around the battery compartment, we punch through the sticker on  the back to find three T6 Torx screws. With the rear housing removed, we get our first look inside the controller as the glossy black exterior gives way to the mossy green PCB interior.
  • After rooting around the battery compartment, we punch through the sticker on the back to find three T6 Torx screws.

  • With the rear housing removed, we get our first look inside the controller as the glossy black exterior gives way to the mossy green PCB interior.

  • So far we've only used our hands and a screwdriver, but we're already in—this controller's already scoring points in our book.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります