英語
日本語

手順 16を翻訳中

手順16
Remove the two PH 0 phillips screws. After the clamp is removed the spacer under it will also need to be removed. Remove the power button by prying up on the hook that's hooked into the motherboard.
Remove Heat Sink Clamp and Power Button
  • Remove the two PH 0 phillips screws.

  • After the clamp is removed the spacer under it will also need to be removed.

  • Remove the power button by prying up on the hook that's hooked into the motherboard.

  • After the hook is lifted the button will slide back and out.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります