メインコンテンツにスキップ
英語
日本語

手順 2を翻訳中

手順2
Use a plastic opening tool to lift the small hinge holding the circled gold ribbon in place, then gently slide the ribbon out of the socket. Use cation, and pull the ribbon straight out. If damaged the camera may not work the same after reassembly.
  • Use a plastic opening tool to lift the small hinge holding the circled gold ribbon in place, then gently slide the ribbon out of the socket.

  • Use cation, and pull the ribbon straight out. If damaged the camera may not work the same after reassembly.

  • Next unscrew the three 4.3 mm Phillips #PH00 screws holding the motherboard down using the PH00 screwdriver.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります