メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての4個のガイドに反映されます。

英語
日本語

手順 6を翻訳中

手順6
Rotate the top of the device towards you so that the audio jack appears on the right side of the device. The audio jack will have a small symbol of headphones next to a small 3.5mm diameter hole. Wedge the plastic opening tool between  where the front and back case panels meet near the audio jack.
  • Rotate the top of the device towards you so that the audio jack appears on the right side of the device.

  • The audio jack will have a small symbol of headphones next to a small 3.5mm diameter hole.

  • Wedge the plastic opening tool between where the front and back case panels meet near the audio jack.

  • Pry the device open using moderate force until you hear a clicking sound. This is the sound of the clips unlocking.

  • Move along the perimeter of the entire device using the same prying motion to gradually separate the front and back panels.

  • Once the edges are open return to the same starting position next to the audio jack.

  • During this step, you may crack some parts of the case. Gently pry around the speakers, audio jack and charging cable ports to reduce this damage.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります