メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての9個のガイドに反映されます。

英語
フランス語

手順 3を翻訳中

手順3
Attach the suction cup to the top right area of the screen. Pull to separate the screen from the rest of the device.
  • Attach the suction cup to the top right area of the screen.

  • Pull to separate the screen from the rest of the device.

  • Be aware of the front camera cable that is still connected to the rest of the device.

  • Detach the display ribbon cable.

Fixez la ventouse à la partie supérieure droite de l'écran.

Tirez pour retirer l'écran du reste de l'appareil.

Faites attention au câble de la caméra avant connecté en haut au centre de l'appareil. Le câble ruban d'affichage doit simplement glisser.

[* black] Attach the suction cup to the top right area of the screen.
-[* black] Pull to remove the screen from the rest of the device.
-[* icon_caution] Watch out for the front camera cable connected to the top middle of the device. The display ribbon cable should just slide out.
+[* black] Pull to separate the screen from the rest of the device.
+[* icon_caution] Be aware of the front camera cable that is still connected to the rest of the device.
+[* orange] Detach the display ribbon cable.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります