メインコンテンツにスキップ
英語
日本語

手順 4を翻訳中

手順4
Lift the front part of shell up, assuring not to pull too hard due a spring that is connect to the shell and the inside of the camera. Carefully, using a small #00 Philips head screwdriver, remove the spring from the inside component of the camera.
  • Lift the front part of shell up, assuring not to pull too hard due a spring that is connect to the shell and the inside of the camera.

  • Carefully, using a small #00 Philips head screwdriver, remove the spring from the inside component of the camera.

  • At this point you should have the shell removed completely. Congratulations! Repeat the steps backwards to get the shell back on your camera unit.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります