手順番号8–MacBook Core 2 Duo Upper Case Replacementを翻訳

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての38個のガイドに反映されます。

英語

日本語

手順 8を翻訳中

手順8

While holding up the upper case, pull up the black tab of the silver cable away from its connector.
If there is no black tab, you can also use a spudger to gently pry the connector from its housing. This connector is tall, so be sure to pry straight up.
If you happen to break your upper case cable when removing the upper case, we stock the cable individually and we have a guide that makes replacing it easy.
While you have the upper case removed, you may want to take the opportunity to remove dust, hair, etc. It's best to use a can of compressed air, though if you use a brush, make sure that its bristles are made of a material (usually animal hair) that doesn't generate static electricity, which can destroy electronics.
Upon reassembly, there are 4 grey plastic clips on the optical drive side of the keyboard (refer to second picture). They must be installed in their slots for the keyboard to snap in properly.
To make the reassamble process easier, it's better to pull out the clips first by pulling it straight up gently. Be careful not to put too much strength because it will break.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。