メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての24個のガイドに反映されます。

英語
中国語

手順 11を翻訳中

手順11
Gently grasp the display assembly and lift it up to open the phone, using the clips at the top of the front panel as a hinge. Open the display to about a 90º angle, and lean it against something to keep it propped up while you're working on the phone. Don't open the display more than 90º—it is still connected to the top of the phone by the display, digitizer, and front camera cables which can tear easily.
  • Gently grasp the display assembly and lift it up to open the phone, using the clips at the top of the front panel as a hinge.

  • Open the display to about a 90º angle, and lean it against something to keep it propped up while you're working on the phone.

  • Don't open the display more than 90º—it is still connected to the top of the phone by the display, digitizer, and front camera cables which can tear easily.

  • Add a rubber band to keep the display securely in place while you work. This prevents undue strain on the display cables.

  • In a pinch, you can use an unopened canned beverage to support the display.

以屏幕顶端为支点,将屏幕缓缓地向上掀起。

将屏幕掀至约90º竖起, 并且在你操作的时候找个东西支撑着它。

請勿將屏幕掀开超过90º, 因为屏幕上还有3条排线连接, 如果掀开角度过大, 可能造成排线损坏。

用橡皮筋将前面板与支撑物固定住。这可以避免拉扯到显示排线。

若在紧要关头时, 你也可以用未开过的罐装饮料撑着屏幕, 这也是可行方法。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります