メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての3個のガイドに反映されます。

英語
フランス語

手順 2を翻訳中

手順2
Using a spudger or a plastic opening tool, disconnect the ribbon cable from the right side of the device. The cable is attached with an adhesive. These images use a metal spudger, which has the potential to damage the device. Use a plastic opening tool or standard spudger instead.
  • Using a spudger or a plastic opening tool, disconnect the ribbon cable from the right side of the device.

  • The cable is attached with an adhesive.

  • These images use a metal spudger, which has the potential to damage the device. Use a plastic opening tool or standard spudger instead.

À l'aide d'un outil d'ouverture en plastique ou en spudger, débranchez le câble ruban du côté droit de l'appareil, où il est fixé avec un adhésif.

Ces images utilisent un spudger en métal, qui pourrait endommager l'appareil. Utilisez plutôt un outil d’ouverture en plastique ou un spudger standard.

-[* red] Using a spudger or plastic opening tool, disconnect the ribbon cable from the right side of the device, where it is attached with adhesive.
+[* red] Using a spudger or a plastic opening tool, disconnect the ribbon cable from the right side of the device.
+ [* icon_note] The cable is attached with an adhesive.
[* icon_caution] These images use a metal spudger, which has the potential to damage the device. Use a plastic opening tool or standard spudger instead.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります