メインコンテンツにスキップ
英語
日本語

手順 3を翻訳中

手順3
Once the wheels are removed from the frame place them on your working surface. The basic idea is to take the most worn wheel and swap it with the least worn wheel, and continue. The pictured swap order (going up/down 2 slots and to the opposite boot) is a common one. The pictured swap order (going up/down 2 slots and to the opposite boot) is a common one.
  • Once the wheels are removed from the frame place them on your working surface. The basic idea is to take the most worn wheel and swap it with the least worn wheel, and continue.

  • The pictured swap order (going up/down 2 slots and to the opposite boot) is a common one.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります