メインコンテンツにスキップ
英語
日本語

手順 20を翻訳中

手順20
With the logic board facing down, push the pins of the new connector through the holes in the logic board, making sure each pin goes through the board. DO NOT use excessive force, as you can bend the pins. DO NOT use excessive force, as you can bend the pins.
  • With the logic board facing down, push the pins of the new connector through the holes in the logic board, making sure each pin goes through the board.

  • DO NOT use excessive force, as you can bend the pins.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります