メインコンテンツにスキップ
英語
日本語

手順 15を翻訳中

手順15
The wifi cable is connected to the bottom of the logic board by a small connector.  This must be disconnected before removing the logic board from the case. Insert the edge of a metal spudger under the logic board, between the wifi cable connector clip and the logic board. Gently pry the connector from the logic board.
  • The wifi cable is connected to the bottom of the logic board by a small connector. This must be disconnected before removing the logic board from the case.

  • Insert the edge of a metal spudger under the logic board, between the wifi cable connector clip and the logic board.

  • Gently pry the connector from the logic board.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります