メインコンテンツにスキップ
英語
日本語

手順 14を翻訳中

手順14
Starting above the battery near the power/volume cable attachment, use a cell phone prying tool to slowly pry the logic board straight up. DO NOT pry quickly, as the wifi cable will still be attached. At this point, the top of the logic board should be lifted from the case. The bottom of the logic board and the wifi cable should still be attached to the steel housing.
  • Starting above the battery near the power/volume cable attachment, use a cell phone prying tool to slowly pry the logic board straight up.

  • DO NOT pry quickly, as the wifi cable will still be attached.

  • At this point, the top of the logic board should be lifted from the case. The bottom of the logic board and the wifi cable should still be attached to the steel housing.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります