メインコンテンツにスキップ
英語
日本語

手順 10を翻訳中

手順10
Areas highlighted in red show three solder joints to the right of the battery, along with four smaller solder joints located to the left of the battery.
  • Areas highlighted in red show three solder joints to the right of the battery, along with four smaller solder joints located to the left of the battery.

  • These joints secure the power/volume flex cable (leftmost joint) and the battery flex cable (rightmost joint) to the logic board.

  • In the next few steps you will desolder the battery and power/volume flex cables from the logic board.

  • These joints may be coated in a clear silicone/glue, which must be removed before desoldering.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります