メインコンテンツにスキップ
英語
日本語

手順 3を翻訳中

手順3
With the panel removed, we get our first glimpse to the inner workings.  Note the bay for the second hard drive in the lower left-hand corner, and the existing system drive in the lower right-hand corner.  The black arrows indicate the two screws to remove, allowing you to pull the drive out of the unit by grasping the black plastic tab and gently pulling to the left.  Remove the WLAN card in the upper left-hand corner by removing the two screws indicated by the red arrow.  Note the order of the antenna cables.  Remove the three RAM modules, the fourth is on the other side of the motherboard.
  • With the panel removed, we get our first glimpse to the inner workings. Note the bay for the second hard drive in the lower left-hand corner, and the existing system drive in the lower right-hand corner. The black arrows indicate the two screws to remove, allowing you to pull the drive out of the unit by grasping the black plastic tab and gently pulling to the left. Remove the WLAN card in the upper left-hand corner by removing the two screws indicated by the red arrow. Note the order of the antenna cables. Remove the three RAM modules, the fourth is on the other side of the motherboard.

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります