メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての3個のガイドに反映されます。

英語
イタリア語

手順 2を翻訳中

手順2
Starting in the top right corner, use both hands to slowly separate the LCD from the front display bezel. Continue separating along the top and left edges of the LCD. Finally, push the LCD up and away from the front display bezel.
  • Starting in the top right corner, use both hands to slowly separate the LCD from the front display bezel.

  • Continue separating along the top and left edges of the LCD.

  • Finally, push the LCD up and away from the front display bezel.

  • Do not try to remove the LCD yet, as the LCD ribbon cable is still routed through the front display bezel.

Iniziando dall'angolo in alto a destra, usa entrambe le mani per separare lentamente lo schermo dalla cornice anteriore.

Continua a separarli lungo il bordo superiore e sinistro dello schermo.

Infine spingi lo schermo verso l'alto, lontano dalla cornice anteriore.

Non cercare ancora di rimuovere lo schermo LCD: il suo cavo a nastro attraversa ancora la cornice anteriore.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります