メインコンテンツにスキップ
英語
日本語

手順 4を翻訳中

手順4
With the laser removed from the system, remove the 2 Phillips PH1 screws hiding the laser. Check if the laser is plastic. If your laser is repairable, it will look like the one shown. If it is not metal, it must be replaced. If your laser is repairable, it will look like the one shown. If it is not metal, it must be replaced.
Repair sanity check
  • With the laser removed from the system, remove the 2 Phillips PH1 screws hiding the laser. Check if the laser is plastic.

  • If your laser is repairable, it will look like the one shown. If it is not metal, it must be replaced.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります