メインコンテンツにスキップ

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
イタリア語

手順 3を翻訳中

手順3
Remove the cover from the Game Pak slot before continuing. Insert the edge of a spudger in between the lower and upper case near the top right corner of the DS Lite. Carefully run the spudger along the right edge of the DS Lite, creating an opening in the process.
  • Remove the cover from the Game Pak slot before continuing.

  • Insert the edge of a spudger in between the lower and upper case near the top right corner of the DS Lite.

  • Carefully run the spudger along the right edge of the DS Lite, creating an opening in the process.

  • Continue running the spudger along the backside of the DS Lite until the majority of the lower case has been separated from the upper case.

Inserisci il bordo di uno spudger tra il case inferiore e quello superiore vicino all'angolo superiore destro del DS Lite.

Fai scorrere con attenzione lo spudger lungo il bordo destro del DS Lite, creando nel frattempo un'apertura.

Continua a far scorrere lo spudger lungo il retro del DS Lite finché la maggior parte del case inferiore è stato separato da quello superiore.

+[* icon_note] Remove the cover from the Game Pak slot before continuing.
[* black] Insert the edge of a spudger in between the lower and upper case near the top right corner of the DS Lite.
[* black] Carefully run the spudger along the right edge of the DS Lite, creating an opening in the process.
[* black] Continue running the spudger along the backside of the DS Lite until the majority of the lower case has been separated from the upper case.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります