手順番号11–GoPro Hero4 Session Teardownを翻訳 - iFixit

修理を始めるには

修理する権利

ストア

ガイドに戻る

英語

日本語

前の手順次の手順

手順 11を翻訳中

手順11

After savaging most of the exterior, we aren't surprised to find the GoPro's battery soldered to the motherboard and glued into a bracket.

No more removable batteries—presumably in the interest of waterproofing.

The Hero4 Session packs a 3.8 V, 1000 mAh, 3.8 Wh battery, just about on par with the Hero 3+, and smaller than the 1160 mAh battery in the Hero4.

After savaging most of the exterior, we aren't surprised to find the GoPro's battery soldered to the motherboard and glued into a bracket.
No more removable batteries—presumably in the interest of waterproofing.
The Hero4 Session packs a 3.8 V, 1000 mAh, 3.8 Wh battery, just about on par with the Hero 3+, and smaller than the 1160 mAh battery in the Hero4.
With an estimated two-hour battery life, you're going to be recharging often—increasing the number of charge cycles on your camera, and decreasing its life before you need to, but can't, replace the battery.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。