Skip to main content
英語
日本語

手順 17を翻訳中

手順17
Removing Top Palm rest from bottom assembly. Part 2 of 2. Once all 12 screws (11 on bottom, and 1 on top) are removed it is time to remove the assembly.
  • Removing Top Palm rest from bottom assembly. Part 2 of 2.

  • Once all 12 screws (11 on bottom, and 1 on top) are removed it is time to remove the assembly.

  • Be careful when removing the assembly, use the picture to get an idea of how to remove it.

  • The top portions of the assembly is loose and be moved. The right/left side use a locking mechanism as detailed in the picture to help you remove it. The bottom part needs to be pushed inwards to unlock and finally remove the assembly.

  • NOTICE THE 4 PIN (or 3) CABLE IN THE PICTURE IT NEEDS TO BE DISCONNECTED FROM THE 4 PIN HEADER (or 3).

  • Enjoy the view. ;)

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります